Thursday, August 21, 2008

Automate DiscCleanup

This method describes how to run the Disk Cleanup tool (Cleanmgr.exe) by using command-line switches. Cleanmgr.exe is designed to clear unnecessary files from your computer's hard disk. You can configure Cleanmgr.exe with command-line switches to clean up the files you want.

1.start >run>cleanmgr /sageset:n
2.set options you want.
3.run these settings at any time no need to configure again using
cleanmgr /sagerun:n

note:where n is a number which can be from 0 to 65535.

You can then schedule the task to run at a specific time by using the Scheduled Tasks tool.

To start the Disk Cleanup tool, either run the Cleanmgr.exe command, or click Start, point to Programs, point to Accessories, point to System Tools, and then click Disk Cleanup.


Disk Cleanup supports the following command-line options:

• "/d driveletter": - This option specifies the drive that you want Disk Cleanup to clean.

Note: The /d option is not utilized with /sagerun: n.

• "/sageset: n" - This option displays the Disk Cleanup Settings dialog box and also creates a registry key to store the settings that you select. The n value, which is stored in the registry, allows you to specify tasks for Disk Cleanup to run. The n value can be any integer value from 0 to 65535. To have all of the options available when you use the /sageset option, you might need to specify the drive where Windows is installed.

• /sagerun: n - This option runs the specified tasks that are assigned to the n value if you use the \sageset option. All drives on the computer are enumerated and the selected profile runs against each drive.

For example, in Scheduled Tasks, you could run the following command after you run the cleanmgr /sageset:11
(this will show a window of disc cleanup in which you select options you need then press OK to save setting at number 11)


schedule task:
now you can Disk Cleanup with selected options by following command:
cleanmgr /sagerun:11

This command runs Disk Cleanup and includes the options that you specified with the cleanmgr /sageset:11 command.


The options for the files that you can specify for Disk Cleanup by using /sageset and /sagerun include:
• Temporary Setup Files - These are files that were created by a Setup program that is no longer running.

• Downloaded Program Files - Downloaded program files are ActiveX controls and Java programs that are downloaded automatically from the Internet when you view certain pages. These files are temporarily stored in the Downloaded Program Files folder on the hard disk. This option includes a View Files button so that you can see the files before Disk Cleanup removes them. The button opens the C:\Winnt\Downloaded Program Files folder.

• Temporary Internet Files - The Temporary Internet Files folder contains Web pages that are stored on your hard disk for quick viewing. Disk Cleanup removes these page but leaves your personalized settings for Web pages intact. This option also includes a View Files button, which opens the C:\Documents and Settings\Username\Local Settings\Temporary Internet Files\Content.IE5 folder.

• Old Chkdsk Files - When Chkdsk checks a disk for errors, Chkdsk might save lost file fragments as files in the root folder on the disk. These files are unnecessary.

• Recycle Bin - The Recycle Bin contains files that you have deleted from the computer. These files are not permanently removed until you empty the Recycle Bin. This option includes a View Files button that opens the Recycle Bin.

• Temporary Files - Programs sometimes store temporary information in a Temp folder. Before a program quits, the program usually deletes this information. You can safely delete temporary files that have not been modified within the last week.

• Temporary Offline Files - Temporary offline files are local copies of recently used network files. These files are automatically cached so that you can use them after you disconnect from the network. A View Files button opens the Offline Files folder.

• Offline Files - Offline files are local copies of network files that you specifically want to have available offline so that you can use them after you disconnect from the network. A View Files button opens the Offline Files folder.

• Compress Old Files - Windows can compress files that you have not used recently. Compressing files saves disk space, but you can still use the files. No files are deleted. Because files are compressed at different rates, the displayed amount of disk space that you will gain is approximate. An Options button permits you to specify the number of days to wait before Disk Cleanup compresses an unused file.

• Catalog Files for the Content Indexer - The Indexing service speeds up and improves file searches by maintaining an index of the files that are on the disk. These Catalog files remain from a previous indexing operation and can be deleted safely.

Wednesday, August 20, 2008

fastest broadband

A 75 year old woman from Karlstad in central Sweden has the world’s fastest internet connection.

Sigbritt Löthberg’s home has massive 40 Gigabits per second connection, thousands of times faster than the average residential connection and the first time ever that a home user has experienced such a high speed.

Sigbritt is no ordinary 75 year old. She is the mother of Swedish internet legend Peter Löthberg who, along with Karlstad Stadsnät, the local council’s network arm, has arranged the connection.

Sigbritt will now be able to enjoy 1,500 high definition HDTV channels simultaneously. Or, if there is nothing worth watching there, she will be able to download a full high definition DVD in just two seconds.

Tuesday, August 19, 2008

create a folder with name "com1" or "con" etc

Please try to create a folder named "CON" or COM1 or COM2 etc.
You cant do it here is a trick to do this:
create a new folder rename it with "com1" and after com1 type ALT+0160 with num pad.
press enter your folder is of name com1.you can create folder of any restricted name.

concept:

windows system had many reserved words like con,com1,com2 for ports etc.If you create folder with that name there must be conflict so you can not make folder with these name.

what this trick do.this trick put an hidden char of UNICODE ALT+0160 at the end of folder name so its not "com1" its "com1 ".(a blank after com1 ).
note : try start menu > accessories>system tools>char map and find equivalent character of ALT+0160

lasik

LASIK (Laser-Assisted In, Situ Keratomileusis) is one of the surgeries that treats refractive errors of the eye. LASIK is a variant of excimer laser photorefractive keretectomy (PRK). Although LASIK is a newer procedure, it is common as surgical techniques and instruments improve. The primary difference between LASIK and PRK is that prior to the use of the laser to change the shape of the cornea, a machine called microkeretome is used to create a thin flap of cornea, which is folded back, and laser treatment is then performed under this flap. Visually recovery is usually faster as well, because the surface layer of the eye does not need to reheal after being removed as it does in PRK.

LASIK is an exciting surgical procedure that is capable of correcting a wide range of nearsightedness (myopia), farsightedness (hyperopia) and astigmatism. LASIK is the acronym for laser assisted in-situ keratomileusis. The name refers to the use of a laser to reshape the cornea without invading the neighboring cell layers. LASIK is currently the most commonly performed refractive procedure in the United States and in India .

Lasik was first performed in clinical trials in the U.S. in 1991. It was officially approved in 1996 in the U.S. It is important to note that the major components of the procedure have a long history. Ophthalmologists have been reshaping the cornea for over 50 years, creating a protective layer of tissue for over 35 years, and using the excimer laser since the 1980's.

LASIK combines the precision of the excimer laser that is used in PRK surgeries with the flap technique that characterizes ALK. First, no removal of the corneal surface tissue is necessary and therefore, postoperative pain is substantially reduced compared to PRK. Second, postoperative visual acuity is restored within a few days rather than weeks. Finally, there is less corneal scarring in the long-term, less change due to healing (regression) and thus greater stability of the correction.

LASIK improves the uncorrected vision for distance - one's visual capacity while not wearing corrective lenses - in most patients who have the procedure. Nearly all patients can expect to achieve 20/40 vision, which most states consider good enough to drive without having to wear contacts or glasses, and many can expect to achieve 20/20 vision or better. However, there are no guarantees that you will have perfect vision. People who are most satisfied with the results of laser correction clearly understand the potential risks and complications and possess realistic expectations of what their vision will be like after surgery.

The effects of LASIK are permanent. The effects of LASIK do not wear off. But, it is important to realize that a person's eye can still change internally. That is why many surgeons recommend having the procedure done after the major eye changes have occurred in one's life. For instance, LASIK is not recommended on children because their eyes change a great deal. They would need the vision fine-tuned in a few years. If the procedure is performed after the age of 18, the chance of long-term stable correction is more likely. Even the eyes of patients over the age of 18 can still be changing. Therefore, we recommend a good conversation with your surgeon so they can review the changes you have had and help you make a decision whether or not you should wait until the changes have slowed down. Patients should also note that while results are usually stable, they can be modified by enhancement procedures - procedures performed after the initial one - if necessary.

You can resume most normal activities immediately after surgery. However, for at least two weeks you will need to avoid activities that would cause perspiration to run into the eyes. You should wear safety glasses while playing contact sports whether or not you have had surgery. But, if you do not routinely wear safety glasses, your surgeon may recommend wearing them for at least one month after LASIK. You will also need to avoid such activities as contact sports and swimming for several weeks. It is important to talk specifically with your doctor about limitations on activities after LASIK.

Fast visual recovery characterizes this operation. Most patients achieve good vision the day after surgery and find that their eyes feel fairly normal within a day. However, vision can continue to improve, and best vision can still take two to three months to occur. Most patients who have LASIK do not wear glasses for their daily activities. However, patients may need to wear reading glasses if they are over the age of 40. This is caused by the normal aging of the eye known as presbyopia. This condition occurs with or without LASIK. Some patients may need a minimal prescription for some activities such as night driving.

Most people in their 40's or older will need reading glasses if their eyes are corrected for distance because the eye's lens loses flexibility as we age. Some patients in this age group select monovision, such as is done with contact lenses. This option allows patients to use one of their eyes for distance and the other to see up close. Although monovision proves to be satisfactory for some patients, many are not comfortable with this arrangement. We will be happy to discuss this with you to meet your individual needs.

We feel it is of extreme importance that you meet the surgeon who performs the procedure prior to making an informed decision on whether to have the surgery. Our surgeons will discuss the risks and benefits of LASIK with you and will try to tell you what you can expect.



Reiki

What is Reiki?

Reiki (Ray Key) is a practical HANDS ON HEALING system that does not go against any religion and is easy to practice once learned. The word Reiki is a Japanese term meaning Universal (Spiritual) Life Force Energy. The word is actually two words combined. The first word Rei means, “God’s wisdom” or “Higher Power” and Ki means, “life force energy” so when the two words are combined you get Life Force Energy originating from God or a Higher Power whichever you so choose to call the first cause of all things. As a hands on healing system the practitioner acts ONLY as a CHANNEL for this Universal Life Force energy to flow through. We neither generate
this energy nor do we direct it...................

If You Want To Be A Reiki Chenal Then call Kapil Dev at 09888239887

Monday, August 18, 2008

Disable Right click

By this ,User can not see right click menu.

Step 1
press Window key + R .to open "run".
Step 2: Type "gpedit.msc" without quotation marks"" then press Enter.
Step 3: A window Group policy opened.
Step 4: Go to folder "User Configuration > Administrative Templates>Windows component>Windows Explorer"
Step 5: Double click on 7th option "Remove Windows Explorer's default context menu ".
Step 6: set it to Enable.

Hide Hard Drives from my computer

We can hide any drive from my computer to do this:

Step 1:
Open run by pressing Window key+R .
Step 2: Type "gpedit.msc" without quotation marks"" then press Enter.
Step 3: A window Group policy opened.
Step 4: Go to folder "User Configuration > Administrative Templates>Windows component>Windows Explorer"
Step 5: Double click on 11th option "Hide these specific Drives from my computer"
Step 6: set it to Enable and select options from list box.

Remove Recycle bin icon

Is it possible to delete Recycle Bin icon from desktop?

The answer is "YES".You can delete "Recycle Bin" from your desktop.To do this you don't need any software or edit Registry (which is dangerous).

Step 1: Open run by pressing Window key+R .
Step 2: Type "gpedit.msc" without quotation marks"" then press Enter.
Step 3: A window Group policy opened.
Step 4: Go to folder "User Configuration > Administrative Templates>Windows component>Desktop"
Step 5: Double click on 6th option "Remove Recycle Bin option from desktop"
Step 6: set it to Enable.

click to see larger image

close the Group policy window.

Now your recycle bin is removed.